Wet spots in your yard are a nuisance and an eyesore. Grass will die if it’s underwater for too long. You can’t mow over wet areas, and everyone tracks mud into the house. If the soggy area is close to your house, it can cause your basement to leak, or worse. So what’s the answer? In this article I review the options
Try simple fixes first – Extend the Downspout
Landscaping near the house can create a basin for water. Extending the downspout usually solves the problem.
Before you start digging a trench or taking some other drastic action to get rid of a wet spot, step back and survey the situation to see where the water is coming from. The problem could be as simple as a downspout or sump pump discharge that’s draining into a low area of your yard. Redirecting your downspout or running the discharge pipe from your sump pump to a different location might be all you need to do.
Draw a Drainage Plan
If you couldn’t find a simple fix for your soggy yard dilemma, you’ll need another strategy. Start by making a sketch of your property showing the house, driveway, patios, street and other features. Then use a line level, builder’s level or some other leveling method to determine high and low spots. Draw arrows to show how water flows and make notes to indicate the relative height of high and low spots. Keep in mind that in most cases you shouldn’t plan to direct water onto your neighbor’s property. And if you’re hoping to discharge water into the street or municipal storm sewer, contact the city first to see what regulations apply.
A sketch will help you decide which of the following strategies is best for your situation. For example, if you simply have no way to drain water from a low spot to another location, your best option may be to build a rain garden or dry well.
Create a Creek Bed
A creek bed like this can channel water away from a low spot or direct runoff into a rain garden or dry well. With the right landscaping, the creek bed will look good even when it’s dry.
You can solve drainage problems and create an attractive landscape feature at the same time with a dry creek bed. Build a creek bed to direct water away from a low spot in your yard. Or if the slope of the ground permits it, use a creek bed to drain a low spot.
Start by making a swale—essentially a gentle, shallow drainage ditch. Then line it with gravel or stones and add interest with boulders, a bridge or plantings.
Of course, you don’t have to turn your drainage project into a creek bed. A simple swale is an effective and subtle way to control surface water. Obviously it’s easier to create a swale before you seed or sod your yard, but if necessary, you can cut out the grass with a sod cutter and replace it when you’re done regrading.
Build a Rain Garden
If you have a low spot in your yard that tends to collect and retain water, consider building a rain garden. A rain garden is simply an area of your yard that’s designed to catch water and is filled with water-loving plants. It doesn’t really solve a soggy yard problem, but a rain garden looks a lot better than a muddy hole. Plus, rain gardens are good for the environment. They reduce runoff and the lawn chemicals, pet waste and sediment that go along with it.
A rain garden doesn’t have to hold water like a pond. You can add drainage and use the rain garden to hold the excess water until it has a chance to drain away. A key part of rain garden design is choosing the right plants for the soil conditions. Typically native plants with deep fibrous roots work well. Learn more about how to build a rain garden in your yard.
Add a Drainpipe
One of the best ways to get rid of water from a low spot is to simply drain it away through an underground pipe. For this to work, you need an area to discharge the water that’s lower than the inlet. The drainpipe should slope downhill at least 1/8 in. per foot. If you had a discharge outlet 100 ft. from the inlet, it would have to be about 1 ft. lower.
To create the drain, you’ll have to dig a gradually sloping trench from the source to the outlet. Then bury a plastic catch basin at the source and connect it to the discharge with PVC drainpipe. This system has a few advantages over a French drain. Since the pipe is solid, and not perforated, there’s no need to provide gravel for drainage along the length of the drainpipe. Also, smooth-wall pipe drains water quickly, and if it gets clogged, you can use a drain snake to clean it out.
Install a French Drain
A French drain is a versatile system for dealing with all kinds of drainage problems. It disperses water over a large area through a buried perforated pipe. The pipe must be surrounded by material that allows water to drain through. A French drain system can be used alone or combined with a dry well.
A properly designed French drain system does not require an outlet. The water will simply soak into the soil as it flows along the perforated pipe. In fact, a French drain doesn’t require an inlet on just one end either. You can construct the drain to accept water along its length, and disperse it underground.